HEADTOOLS FOR MT02 ZEALMECH
RM30.00 – RM100.00
IMPACT DRILL HEADTOOLS
Drill chuck: 10mm
Maximum torque: 35N.m
No-load speed: 0-400/1450r/min
RECIPROCIATION SAW HEADTOOLS
Cutting stroke: 15mm
Reciprocating frequency: 0-3300r/min
JIG SAW HEADTOOLS
Cutting stroke: 12.7mm
Reciprocating frequency: 0-1600/2700r/min
OSCILLATION SAW HEADTOOLS
Vibration frequency: 0-21000ipm, Swing angle: 3°
1 HCS quick insert saw blade,
1 scraper
1 triangular grinding base
4 sheets of sandpaper (60/80/120/180)
IMPACT WRENCH HEADTOOLS
Chuck size 1/4 (6.35mm)+1/2 (12.7mm)
Maximum torque 300N.m
No-load speed 0-2800r/min
Shock frequency 0-4380ipm
SANDING
No-load speed: 0-10000r/min Bottom plate size: 94X135mm
CHAIN SAW HEADTOOLS
Guide length: 4 inches
No-load speed: 4000r/min Chain speed: 7m/s
GRINDER HEADTOOLS
Diameter of cutting blade: 125mm Inner diameter of cutting blade: 22mm
No-load speed: 8000 (r/min)
HAMMER DRILL HEADTOOLS
No-load speed: 0-2000 (r/min)
Shock frequency: 0-5500bpm
Impact energy: 1.7J
Chuck method: SDS
Best Drilling: 6-10mm
INFLATOR PUMP HEADTOOLS
Pressure upper limit: 0-6.9BAR (0-7kg/cm)
No-load speed 0-3300r/min
Description
IMPACT DRILL HEADTOOLS
Drill chuck: 10mm
Maximum torque: 35N.m
No-load speed: 0-400/1450r/min
RECIPROCIATION SAW HEADTOOLS
Cutting stroke: 15mm
Reciprocating frequency: 0-3300r/min
JIG SAW HEADTOOLS
Cutting stroke: 12.7mm
Reciprocating frequency: 0-1600/2700r/min
OSCILLATION SAW HEADTOOLS
Vibration frequency: 0-21000ipm, Swing angle: 3°
1 HCS quick insert saw blade,
1 scraper
1 triangular grinding base
4 sheets of sandpaper (60/80/120/180)
IMPACT WRENCH HEADTOOLS
Chuck size 1/4 (6.35mm)+1/2 (12.7mm)
Maximum torque 300N.m
No-load speed 0-2800r/min
Shock frequency 0-4380ipm
SANDING
No-load speed: 0-10000r/min Bottom plate size: 94X135mm
CHAIN SAW HEADTOOLS
Guide length: 4 inches
No-load speed: 4000r/min Chain speed: 7m/s
GRINDER HEADTOOLS
Diameter of cutting blade: 125mm Inner diameter of cutting blade: 22mm
No-load speed: 8000 (r/min)
HAMMER DRILL HEADTOOLS
No-load speed: 0-2000 (r/min)
Shock frequency: 0-5500bpm
Impact energy: 1.7J
Chuck method: SDS
Best Drilling: 6-10mm
INFLATOR PUMP HEADTOOLS
Pressure upper limit: 0-6.9BAR (0-7kg/cm)
No-load speed 0-3300r/min
Additional information
| Weight | N/A |
|---|---|
| JENIS TOOLS | 1. DRILL – IMPACT (KHUSUS BUKA SKRU), 2. DRILL – WRENCH (KHUSUS BUKA NUT KETAT), 3. DRILL – HAMMER (KHUSUS TEBUK DINDING), 4. SAW – CHAIN SAW 4INCH, 5. SAW – RECIPROCATING, 6. SAW – JIG SAW, 7. SAW – OSCILLATING/SCRAPER, 8. GRINDER, 9. SANDING, 10. COMPRESSOR PUMP, 11. CIRCULAR SAW |
Reviews
There are no reviews yet.